LIGHTER FILLING INSTRUCTIONS


square lighters

Instructions for our Extra, Marble, Color Block, and Glossy Lighters

This refillable lighter takes Zippo or Zippo-style lighter fluid. To fill, take the inside metal tank out of the lighter case. Turn over and hold upside down. Peel back the felt layer slightly. It is not necessary to unscrew the flint screw for this process. Saturate fabric/fill to about 80%. If lighter fluid overflows, wipe the lighter and any other affected areas with a damp cloth. Replace felt pad. Turn right-side up, and re-insert inside metal tank into lighter case. Make sure there is no lighter excess lighter fluid that hasn’t been wiped as it is, of course, very flammable. Your lighter is now filled and is ready for use.

Please read insert in lighter packaging for more information.

 

 

tall lighters


Instructions for our Stick and Slim Block Lighters

This refillable lighter takes Zippo or Zippo-style lighter fluid. To fill, hold lighter upside down and unscrew bottom screw. Insert the dropper and slowly fill to about 80%. If lighter fluid overflows, wipe the lighter and any other affected areas with a damp cloth. Replace screw. Turn right-side up, and make sure there is no lighter excess lighter fluid that hasn’t been wiped as it is, of course, very flammable. Your lighter is now filled and is ready for use.

Please read insert in lighter packaging for more information.